FigureLane

Bookkeeping for heating engineers

Bookkeeping for a heating or gas engineer differs from general small-business bookkeeping in four places: service plans paid in advance, parts kept on the van, boilers and heat pumps bought for installs, and VAT rules that treat heat pumps differently from boilers. Cost each install as its own job, keep a list of service plan visits owed, count van stock regularly, and set money aside in the winter rush for the January tax bill.

On this page

Three kinds of heating income

Most heating engineers earn money three ways, and each is easier to manage when it has its own income category:

  • Breakdowns and repairs: short jobs billed by call-out and time, or a fixed price. High volume, small amounts, busiest in winter.
  • Boiler and heat pump installs: fewer, larger jobs with equipment, several days’ labour and usually a deposit.
  • Services, safety checks and plans: annual boiler services, landlord gas safety checks, and monthly or yearly service plans.

Service plans paid in advance

When a customer pays £120 for a year of cover, you have the money but not yet done the work. Under the cash basis, the standard method for sole traders, you record it as income when it arrives. If you use traditional accounting, your accountant may spread it over the year instead. Agree the method and use it consistently.

Either way, keep a simple list of active plans with the start date, renewal date and visits owed and done. It shows what work you have already been paid for, and which customers are due to renew.

Van stock and the parts you carry

Every van carries diverter valves, pumps, PCBs, fittings and filters. Parts bought for stock are not the same as parts used on a job: record the merchant invoice when you buy, and note the part on the customer invoice when you use it. Without that link, a busy month can show high parts costs and no matching income.

Count the van at least quarterly and compare the count with what you bought and billed. The gap is usually parts fitted and not billed, warranty swaps without paperwork, or stock moved between vans.

Boilers, warranties and manufacturer schemes

  • Install equipment: record each boiler, cylinder or heat pump against the install job it went to, so each job shows its real cost.
  • Warranty parts: when a manufacturer replaces a part under warranty, keep the claim number with the job. If you charge only labour, say on the invoice that the part was supplied under warranty.
  • Installer scheme rewards and rebates: record them when you receive them, as a reduction in cost or as other income, as your accountant prefers, with the paperwork attached.
  • Gas Safe, training and calibration: registration fees, assessments and flue gas analyser calibration are business costs; keep each receipt.

VAT: boilers and heat pumps are treated differently

You must register for VAT once your taxable turnover goes over £90,000 in a rolling 12 months. After that, boiler installs, repairs and services are normally charged at 20%.

Installing energy-saving materials in homes, which include air and ground source heat pumps and central heating controls, is zero-rated until 31 March 2027 and moves to the reduced rate of 5% from 1 April 2027. Gas boilers are not on that list. Check Notice 708/6 before you price a job that mixes the two, and record the VAT rate on each invoice line.

Job costing on installs

An install is where a mistake costs most, so cost each one as its own job: equipment, parts, sundries and labour. Comparing the total with the price shows the real margin while the next quote is still being priced.

Fictional install: combi boiler replacementAmount
Price quoted and invoiced£2,850.00
Boiler and flue kit£1,150.00
Filter, controls and fittings£260.00
System flush and inhibitor£45.00
Labour, 2 engineers × 8 hours × £22£352.00
Disposal of old boiler£40.00
Total job cost£1,847.00
Gross margin before overhead£1,003.00 (35.2%)

Worked example: one October

A fictional sole-trader heating engineer with an apprentice closes October 2026 with the figures below. Recording income by type shows that three installs brought in more than all the breakdowns, but carried most of the costs.

LineCalculationAmount
Breakdowns and repairs45 jobs, average £140£6,300.00
Boiler installs3 × £2,850£8,550.00
Services and landlord safety checks30 × £80£2,400.00
Service plans sold10 × £120£1,200.00
Total income£18,450.00
Boilers and flue kits3 installs£3,450.00
Parts and fittingsMerchant invoices£1,980.00
Apprentice wagesPayroll£1,600.00
Van, fuel and parkingReceipts£640.00
Gas Safe, insurance and calibrationReceipts and premiums£230.00
Total costs£7,900.00
Profit before tax£18,450 − £7,900£10,550.00

Vans and mileage

Decide with your accountant whether to claim the actual costs of the van or use HMRC’s simplified flat rate. From 6 April 2026 the flat rate for cars and goods vehicles is 55p a mile for the first 10,000 business miles in the tax year and 25p after that. You cannot use the flat rate for a van you have already claimed capital allowances on, and once you use it for a vehicle you must keep using it for that vehicle.

Either way, keep the records the method needs: a mileage log with date, job and miles, or fuel, repair and insurance receipts by van.

The winter rush and the January bill

Heating work peaks from October to February, which is also when the 31 January Self Assessment payment falls. Look at last year’s income by month and set aside part of each busy month’s profit for the quiet summer and for that bill, which can include a payment on account for the year ahead.

Service plans help: annual services can be scheduled into the summer, and renewals bring in cash when breakdowns are slow.

A monthly close for heating engineers

  • Match every completed job to an invoice, and every paid invoice to a payment in the bank.
  • Check install deposits have been deducted on the final invoices.
  • File merchant invoices by job or by van stock, and attach warranty claim numbers.
  • Update the service plan list with visits done and renewals due.
  • Move money aside for tax and the quiet months.

Working for builders: CIS

Installing heating systems in a building is a construction operation. When a builder or developer pays you for that work, they deduct CIS from your labour, and the VAT reverse charge can apply if you are both VAT-registered. If you pay other engineers for that kind of work, you are the contractor and must verify them and file monthly returns.

Common questions

How should a heating engineer record service plan income?

Under the cash basis, the standard for sole traders, record it when the money arrives. If you use traditional accounting, your accountant may spread it over the plan’s term. Either way, keep a list of visits owed.

How do I track parts on a van?

Record stock purchases when you buy them, note each part on the customer invoice when you fit it, and count the van at least quarterly to find parts fitted but not billed.

Is VAT charged on heat pump installs?

Installing air or ground source heat pumps in homes is zero-rated until 31 March 2027 and moves to 5% from 1 April 2027. Gas boiler installs are normally standard-rated at 20% if you are VAT-registered.

Can I use the mileage flat rate for my van?

Yes, if you have not claimed capital allowances on it. From 6 April 2026 the rate is 55p a mile for the first 10,000 business miles in the tax year and 25p after that.

How can a heating engineer handle the quiet months?

Set aside part of each winter month’s profit, schedule annual services in the summer, and time service plan renewals so income arrives when breakdowns are slow.

Sources

Prepare your own documents